Hillbilly Clutches

Clutch for Hill Billy (Left, Right or Pair)

Get rid of the noisy clicking when you push your Hill Billy golf trolley - these one way clutches are suitable for all Hill Billy type golf trolleys except the newer Chinese built Compact + and Hill Billy 'Terrain'.
These clutches have superior internal parts, the same as those used in our more expensive PowaKaddy type clutch.

To test if your Hill Billy golf trolley requires new clutches:
While the trolley is propped up with the rear wheels off the ground, both wheels should spin freely in a forward direction and should be able to be pulled back but with a fair amount of resistance. If any of the wheels do not do this then the clutch has developed a fault.

These clutches are easily self fitted:

1. Remove the wheel/s from the trolley
2. Pull the clutch away from the existing roll pin (you may need to tap if off lightly with a hammer)
3. Slide the new clutch onto the axle until it engages with the roll pin
4. Slide the wheel back onto the axle until it engages with the clutch